Operation Manual

www.schaerer.com Product description
BASCJ_EN
V02 | 08.2012
10
Serial plate
The serial plate is located behind the drip tray on the left side
► In the event of a technical problem or warranty claim, specify the serial number shown on
the serial plate.
Declaration of conformity
Manufacturer's address
Applied standards
The following harmonised standards have been applied:
The stated manufacturer declares herewith that this machine complies with all relevant stipu-
lations of the specified EU directives. In case of any modifications of the units that have not
been approved by Schaerer, this declaration is rendered invalid.
Example of a serial plate
Manufacturer Responsible for documentation
Schaerer AG
P.O.Box
Allmendweg 8
CH-4528 Zuchwil, Switzerland
Tel. [phone]
F [phone]
[e-mail]
www.schaerer.com
Schaerer AG
Hans-Ulrich Hostettler
P.O.Box
Allmendweg 8
CH-4528 Zuchwil, Switzerland
Low Voltage Directive 2006/95/EC EMC Directive 2004/108/EC
• EN 60335-1:2002 +A1 +A11 +A12 +A13
+A14 +A15 +A2
• EN 60335-2-75:2004 +A1 +A11 +A2
+A12
• EN 62233:2008
• EN 55014-1:2006 +A1
• EN 55014-2:1997 +A1 +A2
• EN 61000-3-2:2006 +A1 +A2
• EN 61000-3-3:2008
Safety EMC
• IEC 60335-1:2001 +A1 +A2
• IEC 60335-2-14:2006 +A1
• IEC 60335-2-15:2002 +A1 +A2
• IEC 60335-2-75:2002 +A1 +A2
• IEC 62233 Ed1:2005
• CISPR 14-1 Ed 5.1: 2009
• CISPR 14-2 Ed 1.2: 2008
• IEC 61000-3-2 Ed 3.2: 2009
• IEC 61000-3-2 Ed2.1:2001
• IEC 61000-3-3:2008