Operation Manual

40
www.schaerer.com
User Manual SCF - EN
03.2010 / Edition 07
Care
Plug&Clean
Cleaning of the Plug&Clean consists of three parts.
Automatic foamer rinsing for a maximum of 3 minutes y
after each beverage with milk or milk foam
Display-guided milk system rinsing y
Once per week y , lay combi spout, milk hose and milk
nozzles in a cleaning solution
5.1.3 Mixer rinsing
Mixer rinsing is a mixer interim cleaning.
Mixer rinsing is an integral part of the cleaning mode.
5.1.4 Combi spout cleaning
Thorough cleaning of the milk system. The exact
sequence of this manual cleaning is described in the
cleaning instructions.
5.1.5 Milk container cleaning
Clean the milk container thoroughly every day.
5.1.6 General cleaning
Grounds container cleaning
(grounds chute, optional)
Empty the coffee grounds container and rinse under 
running water
Clean with a clean, damp cloth 
Drip tray, housing and front panel
 Clean the cold machine using a damp cloth
Wipe dry using a ne woolen cloth or chamois leather 
Cleaning metal surfaces
For cleaning metal housing parts (matte surface), we
recommend Schaerer Purargan® forte cleaner.
Do not clean with scouring powders or similar.
There is a risk of causing scratches or scores.
Do not use any sharp cleaning materials or
implements.
Plug&Clean cleaning program
w Cleaning instruction
Mixer rinsing
w Cleaning instruction
Combi spout cleaning
w Cleaning instruction
Observe the hygiene
instructions.
See HACCP schedule.
Order numbers for the
Schaerer care program
w Appendix
Accessories and spare parts
page 64
Switch off the machine before
cleaning the front panel
to avoid a beverage being
accidentally dispensed.
Caution.
Risk to the machine.
Follow the manual.