Operation Manual
26
www.schaerer.com
User Manual SCF - EN
03.2010 / Edition 07
Software
Descaling
Descaling begins. This part of the routine takes
about 40 min.
On completion of descaling, carefully empty the
collection container
Replace the water tank
Empty remaining descaling solution from water tank
Rinse water tank and ll to maximum with cold water
Replace the water tank
Rinsing
Rinsing begins. This part of the routine takes about
40 min.
When requested rell with fresh cold water
(once after about 16 min, and again after
about 32 min)
Empty collection container
After the nal rinse the steam boiler is heated. The hot
water expands and nally exits briey as steam.
The descaling is complete. Completion is indicated on
the display.
Descaling machine with constant water
supply
Preparation
The following is needed for descaling:
2 bottles of Schaerer Liquid Descaling Agent y
(0.75 l each)
3 bottle water (2.25 l) y
5-litre collection container (for coffee machines y
without plumbed waste water drain)
If the coffee machine is still hot a cooling routine
initially starts. The cooling routine takes 5-10 min.
Displays lead step by step through the program. Follow
the instructions.
Remove water tank
Close main water supply tap
Turn and remove seal plug on water tank connector
counter-clockwise
(at screwdriver, see illustration 1 and 2)
Stir descaling solution in water tank with cold water
Order numbers of the article
w Appendix
Accessories and spare parts
page 64
Caution.
Hot steam.
Observe the Safety
chapter.
Caution.
Hot steam
and hot water.
Burn hazard.
Scalding hazard.
Observe the Safety
chapter.