User manual

Operation

Page 4-6 BASCC BC - 02.04 - V01

4.5.3 Double Button

The beverage type on the product button, if configured in this way, is dispensed twice.

Perform the following procedure:

1. Place one or two empty cup(s) under the coffee outlet.

If two cups on the coffee output are to be filled simultaneously, ensure that

the cups are positioned exactly under the outlet openings.

2. Press the button programmed for double beverage output

(see Fig. 014).

3. The displayed buttons for products change to "double beverage output" (see

Fig. 015).

4. Select the desired beverage on the control panel.

5. Only remove the cup(s) if the text in each product field no longer blinks and

Select Product appears on the status line.

4.5.4 Dispensing Coffee With Previously Ground Coffee

- The coffee machine can be configured for coffee preparation with previously ground

coffee beans.

- Beverages prepared with previously ground coffee beans cannot be pre-selected.

- Only use ground coffee (e.g. decaffeinated)

1. Place the empty cup(s) under the coffee outlet

(see Fig. 012).

2. Press the button Decaffeinated

(see Fig. 016).

3. All of the displayed buttons for possible

decaffeinated products change to

"decaffeinated beverage output" (see Fig. 017).

The following appears in the status line: Pour

in the coffee powder and select the product.

4. Pour ground coffee for one or two cups into the

funnel for ground coffee (1) (see Fig. 018)

5. Press the button for the desired beverage.

6. Only remove the cup(s) if the text in the

corresponding product field no longer blinks

and Select Product appears on the status line.

Fig. 015

Fig. 014

Fig. 018

Fig. 016

Fig. 017

Fig. 018