Technical data
www.schaerer.com Messages & Troubleshooting
56 / 62
Programming manual / V01 / 02.2010
Dark Touchscreen / no contrast
Message Cause Remedy
Plug at power socket is disconnected or ●
main switch is OFF.
Touchscreen defective. ●
Capacitor in the 5V supply missing. ●
Wrong revision of touchscreen Installed ●
(current version: rev. 5a).
Cable on HMI board wrongly placed. ●
Reconnect plug at power socket or switch main ►
switch to ON.
Check the Touchscreen on function. ►
Refer to the following technical informations: ►
TI 004-07 [SCC] Additional capacitor for power -
supply
TI 005-07 [SCC] New Touchscreen set 057900 -
TI 009-09 [SCC] Touchscreen rev 5a -