Technical data

www.schaerer.com 5. Chip card service
38 / 62
Programming manual / V01 / 02.2010
5.3.1 Simulate CHEF card
Parameter / Menu Procedure Explanations & Remarks
1. Free vend
1. Free vend
Press “Free vend” to deliver the next selected beverage ►
free of charge.
Parameter only works together with an ac-
counting system!
2. View counters
2.1. Daily counter
To view the daily counter. ► Erase daily counter:
Press ●
Daily counter
(Touch-
screen header) to erase the counter.
Conrm with ●
OK
.
2.2. Monthly counter
To view the monthly counter. ►
The monthly counter can not be erased!
2.3. Machine counter total
To view the machine counter total. ►
The machine counter total can not be
erased!
2.4. Service counter
To view the service counter. ►
The service counter can not be erased!
2.5. Cleaning statistics
To view the cleaning statistics. ►
The cleaning statistic can not be erased!
3. Congure products
A limited amount of parameters can be set using the CHEF card.
Product name Cappuccino
Beverage name can not be changed!
Set parameter ► refer to page 7!
Water quantity 40 ml
Set the water quantity for the selected beverage. ►
–
Power quantity 8.0 gr.
Range: 0.0-16.0 grams
Set the powder quantity for the selected beverage. ►
IMPORTANT REMARK:
Do not set over 16 grams! Risk of brew ●
chamber overlling!
2x Powder quantity 0.0 gr.
Set the amount of coffee powder for double beverages. ►
Parameter appears only if “double product”
is enabled!
Milk time 10.0 s.
Set the output time for hot milk. ►
–
Cold milk 0.0 s.
Set the output time for cold milk. ►
–
Grinder left 100 %
Grinder front 0 %
Range: 0-100 %
Set the grinder mixture for the selected beverage. ►
Depending on machine conguration 1 to 4
grinders are available:
Grinder left ●
Grinder back ●
Grinder right ●
Grinder front ●