Technical data

www.schaerer.com 3. Congure products
28 / 62
Programming manual / V01 / 02.2010
Parameter / Menu Procedure Explanations & Remarks
2x powder quantity 14.0 gr.
Refer to “powder quantity” on page 26 ►
Parameter appears only if “double product”
is enabled!
2x delay 0.0 s.
Refer to “Delay (pre-infuse) on page 27 ►
Parameter appears only if “double product”
is enabled!
2x open brew chamber 0.0 s.
Refer to “Opening of brew chambe” on page 27 ►
Parameter appears only if “double product”
is enabled!
2x wet pressing Disabled
Refer to “Wet pressing” on page 27 ►
Parameter appears only if “double product”
is enabled!
2x initial pressure Level 1
Refer to “Initial pressure” on page 27 ►
Parameter appears only if “double product”
is enabled!
Produce a test beverage (with / without milk)
Press ►
Cappuccino
(header in the Touchscreen).
The following parameters appear. ;
During dispensing the following message
appears on the Touchscreen:
Your product is being prepared.
No error occurred.
Cancel
The output can be stopped by pressing .
Test product
To test a regular beverage. ►
Test 2x product
To test a double beverage. ►
Test grind quantity
To test the powder quantity. ►
Test 2x grind quantity
To test the powder quantity for double beverages. ►
3.2. Delete product
Select the beverage which should be deleted. ►
Press ► to go back without deleting a beverage.
REMARKS:
Only beverages from the machine spe- ●
cic list can be deleted!
Can not be made undone! ●
3.3. Set product parameters
Beverages without milk
Refer to page ► 25