Technical data

www.schaerer.com3. Congure products
Programming manual / V01 / 02.2010
25 / 62
3. Congure products
Parameter / Menu Procedure Explanations & Remarks
3.1. Dene new product
Select the desired base beverage from the list. ►
REMARKS:
Product (beverage) conguration is ●
based on two lists:
Standard list (not changeable) -
Machine specic list (changeable) -
In general here is dened what symbol ●
is used for a new dened beverage.
Example - Beverages without milk
Product names Coffee 2
Enter the name for the new beverage. ►
Set parameter ► refer to page 7!
Product type Coffee
Base beverage from the list (see above).
Parameter can not be changed!
Counted products 1
Set the amount of counted beverages per beverage out- ►
put.
–
Strokes per button 1
Set the amount of piston strokes per beverage output. ►
Recommended for double products (2
strokes) or when using pots!
Water quantity 60 ml
Set the water quantity for the selected beverage. ►
–
Powder quantity 8.0 gr.
Range: 0.0-16.0 grams
Set the powder quantity for the selected beverage. ►
IMPORTANT REMARK:
Do not set over 16 grams! Risk of brew ●
chamber overlling!
Pre-selection Enabled
Enable or disable beverage pre-selection. ► Disable for machines in self-service op- ●
eration!
Must be enabled in general in “general ●
parameters”!
Grinder back 100 %
Grinder front 0 %
Range: 0-100 %
Set the grinder mixture for the selected beverage. ►
Depending on machine conguration 1 to 4
grinders are available:
Grinder left ●
Grinder back ●
Grinder right ●
Grinder front ●
Decaffeinated Preselection
Range: Preselection, Disabled
Set the output type for decaffeinated (DECAF) bever- ►
ages.
Procedure with “Preselection”:
Press the decaffeinated button.1.
Press the beverage button.2.
Pre-infuse 0 ml
Set the pre-infuse quantity. ► Extends the extraction time; set to maximal
1 ml per gram of coffee powder!
Recommended for:
Espresso ●
Ristretto ●
Cappuccino ●