Technical data

www.schaerer.com1. General parameters
Programming manual / V01 / 02.2010
21 / 62
Parameter / Menu Procedure Explanations & Remarks
Example for the generated message during the cleaning cycle
Today’s cleaning
- Remove milk container and clean
- Insert cleaning container with clean-
ing agent
Daily cleaning:
User Daypure
Dosage 100 ml
Leave the fridge door open
OK
Based on the settings made in the menu “Cleaning pa- ►
rameters” a message will be shown during the cleaning
cycle.
–
1.6. Machine information
Machine number 0.00.000‘00X
Set machine number (YY.WW.NNNNNN):
YY. = Year of production ●
WW. = Week of production ●
NNNNNN = Machine number ●
Machine number:
Refer to the serial plate! ●
Installation number 2
User one number per customer only! This way only one ●
CHEF card is needed to program all machines!
Country codes 0
IMPORTANT REMARK:
Parameter not used anymore! ●
1.7. Time / Date
Date XX.XX.XXXX
Set date. ►
Set parameter ► refer to page 7!
Time XX:XX
Set time. ►
–
Summer/winter time Disabled
Enable if the machine should switch automatically from ►
summer to winter time (day light saving).
–
Change date format
Press to change the date format on the Touchscreen. ►
–
Change time format (12/24)
Press to change the time format on the Touchscreen. ►
–