Technical data

www.schaerer.comInitial start-up software
Programming manual / V01 / 02.2010
13 / 62
Congure grinders
Step 1: enable or disable grinders
Press the desired symbol to enable or disable the cor- ►
responding grinder(s).
Step 2: enter coffee roast
Press the grinder symbol to enter the name of the used ►
coffee roast.
Step 3: set default grinder, decaffeinated slot and de-
caffeinated source
Default grinder: ●
Denes the standard grinder which is used for new -
beverage programming.
Decaffeinated slot ● :
Denes where decaffeinated coffee powder is in- -
serted.
Decaffeinated source ● :
Denes on which side decaffeinated coffee pow- -
der is inserted.
IMPORTANT REMARKS:
Only enable grinders which are physi- ●
cally installed on the machine!
Machines with 4 grinders do not have ●
a manual inlet for decaffeinated coffee
powder (DECAF)!
Refer to page 17 for further informa- ●
tions.
Machine ll-up
If all settings are done the machine starts automatically
with the ll-up program..
The ll-up takes approximately 2 minutes.
Machine ready for operation
As soon the machine has reached it’s set temperature the
machine will be ready for operation. From here on more
programming functions can be done.