Technical data

www.schaerer.com Initial start-up software
12 / 62
Programming manual / V01 / 02.2010
Select operating mode
Possible selections:
Operator service ● :
For machines in normal operation. -
Self-service ● :
Fro machines in self-service operation. -
–
Select machine type
Possible selections:
C: ●
1 boiler for coffee and hot water -
C: ●
1 boiler for coffee, 1 boiler for hot water -
C UC: ●
1 boiler for coffee and hot water, 1 boiler for steam, -
under counter milk system
BC: ●
1 boiler for coffee, 1 boiler for hot water -
BC UC: ●
1 boiler for coffee, 1 boiler for hot water, 1 boiler for -
steam, under counter milk system
BCL: ●
1 boiler for coffee, 1 boiler for hot water, 1 boiler for -
steam, integrated cold milk system
Refer to chapter „1. General parameters“,
menu “1.1 Set temperature” on page 15.
Machine information
Set machine number (YY.WW.NNNNNN):
YY. = Year of production ●
WW. = Week of production ●
NNNNNN = Machine number ●
Set installation number:
User one number per customer only! This way only one ●
CHEF card is needed to program all machines!
Country code:
Parameter not used anymore! ●
Conrm settings:
Conrm settings using the ► button.
Return to the previous selection using the ► button.
Machine number:
Refer to serial plate! ●