Operating instructions

www.schaerer.com Operation
14 / 56
Operating instructions / V07 / 01.2010
Operation
This chapter describes the basic functions of the coffee maker. Following the instructions here is
necessary for safe and problem-free daily operation.
Observe the safety instructions on page 53!
Inspection
Prior to switching on the machine, check the following:
► The fresh water supply is open.
► The bean container(s) is/are lled (see below) and the slides are open.
► The grounds container is empty and inserted correctly.
► The coffee machine is connected to the power supply.
Preparing the coffee machine for operation
Filling up coffee beans
The bean container may be lled with a maximum of 1000 grams of fresh coffee beans. Only
pour roasted coffee beans into the bean container(s)! Never reach with your hands into the bean
container(s) when the machine is switched on!
► Open the bean container lid.
► Fill with coffee beans (max. 1000 grams per bean container).
► Reclose lid to bean container.
Switching on the coffee machine
Never use force, strong pressure or sharp objects on the Touch Screen!
► Touch and hold the Touch Screen on any place for ± 3 se-
cond
1
.
► Wait, untill „select product“ appears in the status line on
the Touch Screen
2
.
► The coffee machine is now ready for operation.
1
Filling milk hose (from software V2.51 on):
► To ll the milk hose press
OK
. ( The
OK
button is only active when milk is in the con-
tainer!).
► Milk hose is lling.
Infromation:
This request appears every time the machine is switched on or after every cleaning cycle! By
pressing
OK
the milk system will be activated; by pressing
Cancel
deactivated.
2