User`s manual

8
READ AND SAVE THESE INSTRUCTIONS!
• This is an electric device with moving components. There is the possibility of
fire, electric shock, or injury to persons. Ensure all the safety recommendations
are adhered to in order to minimize this risk.
• Disconnect all power and unplug the unit before you inspect, clean or perform
maintenance on the components of the unit.
• Never reach into the unit when it is running; you could become entrapped by
the v-belt or injured by the rotating fan blades.
• Do not service the electrical components unless you are certified to do so.
• The metal frame edges are sharp; don't run your hand along them. Be careful
and wear gloves when you reach under the frame to inspect the PVC pipes and
mesh socks.
• A GFCI (Ground Fault Circuit Interrupter) is required for use with this unit.
• If pads and grates are removed for servicing, they must be replaced prior to
operating unit.
• Unit cannot be used with a solid-state control device.
• An extension cord can not be used with this unit.
• Units can only be used in an environment it has been certified for.
Table of Contents
SAFETY RECOMMENDATIONS