User Manual

©2017 Pinnacle Climate Technologies. All rights reserved.
M-CIRCFAN-U
A DIVISION OF PINNACLE CLIMATE TECHNOLOGIES
www.schaeferventilation.com • 1.800.779.3267
4
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
Fan does not operate
1. Fan not plugged in
2. Blown fuse or tripped circuit breaker
3. Defective on/off switch
4. Defective motor
5. Fan blade contacting housing
1. Check power cord connection
2. Replace fuse or reset circuit breaker
3. Repair or replace switch
4. Repair or replace motor
5. Realign fan blade in fan housing
Insufficient airflow
1. Guards excessively dirty
2. Blade and motor excessively dirty
1. Clean inlet and outlet guards
2. Clean blade and motor
Excessive noise
1. Fan blade contacting housing
2. Defective motor bearings
3. Loose guards
1. Realign fan blade in fan housing
2. Repair or replace motor
3. Tighten guard fasteners
Excessive vibration
1. Damaged fan blade
2. Motor shaft bent
3. Motor loose
1. Replace fan blade
2. Repair or replace motor
3. Realign if necessary and tighten fasteners
TROUBLESHOOTING
Pinnacle Climate Technologies Limited Warranty Policy
Pinnacle Climate Technologies (PCT) provides the following limited warranty from the date of invoice to the initial purchaser of our prod-
ucts or to its customer with a dated proof of purchase:
Two-year coverage (unless otherwise indicated below) applies to all products, components and assemblies provided by PCT that prove to be defec-
tive in material or workmanship. Any such defective product will be repaired or replaced at PCT’s option, with the defective product or component
returned upon approval to PCT, F.O.B Sauk Rapids, Minnesota.
This warranty does not cover: failure, damage or malfunction as a result of: Improper installation or installation not in accordance with installation
instructions. Operating conditions that vary from PCT’s operating instructions. Misuse, abuse, negligence, alteration, or accident. Transporting the
product. Improper operation or lack of appropriate or regular maintenance of the product. Loss of time, inconvenience, loss of use of the product or
other consequential or incidental damages. Parts that need replacement due to normal wear and tear. Superficial or cosmetic rust or corrosion. Any
product whose name plate has been removed.
A full warranty statement may be printed or downloaded from www.schaeferventilation.com.
WARRANTY
MAINTENANCE
The fan you have purchased is built with heavy duty components, designed to give you many years of worry-free performance.
Like anything else that is mechanical, your fan will require a small amount of periodic maintenance to assure maximum efficiency.
Disconnect power before cleaning or maintaining your fan in order to prevent serious injury or death.
!
Some maintenance procedures may require removal of fan guarding.
After servicing, guards and other safety devices must be reinstalled per their original condition.
Excessive dust and debris may cause overheating and reduced fan performance.
Keep guards, motor and blades clean by vacuuming or wiping with a damp cloth.
Do not use harsh chemicals or cleaners to clean any part of the fan.
Pressure washing the unit will void the warranty.
Sealed motor bearings are pre-lubricated and do not require servicing.