User Manual

INTRODUCTION Congratulations on your selection of a new Vane Axial Fan from Pinnacle Climate Technologies. Our goal is to provide you with the very best in high-performance air ventilators. Reading this Owner’s Manual will help you achieve the maximum benet from your portable air ventilator. If you do not understand any portion of this Manual, please contact Pinnacle Climate Technologies or your authorized dealer for proper assistance prior to operating this Fan. Do not allow anyone to operate the Vane Axial Fan without rst reading the Operator’s Manual and becoming familiar with its operation. Pinnacle Climate Technologies has endeavored to provide you with the nest equipment available for providing air for portable ventilation purposes. The possibility does exist, however, that the Vane Axial Fan can be subjected to applications not intended by Pinnacle Climate Technologies. Misuse and/or misapplication of the Vane Axial Fan can lead to the possibility of serious damage, injury or even death. Record the Vane Axial Fan model and serial number in the space provided below. Model No.___________________________ Serial No. ___________________________ Date Purchased ______________________ All specications are general in nature and are not intended for specic application purposes. Pinnacle Climate Technologies accepts no responsibility for variations may be evident in actual products, specications, pictures and descriptions contained in this publication.
ALWAYS SHUT OFF THE FAN AND UNPLUG IT FROM ITS POWER SOURCE TO PREVENT ACCIDENTAL STARTING AND THE
POSSIBILITY OF ELECTRICAL SHOCK AND/OR ELECTROCUTION. BE SURE THE FAN BLADE HAS STOPPED ROTATING BEFORE PLACING ANY OBJECTS OR FINGERS NEAR THE FAN GRILL. MAINTENANCE
DANGER
1. Visually check all fasteners and individual components for loose or broken parts. Tighten or replace items as required, with genuine, factory approved replacement parts only. 2. Keep the Fan blade clean from debris. Accumulation of dust, dirt, paint, etc. on the Fan blade will throw the blade rotation out of balance resulting in damage. To clean the Fan blade, be sure the plug is disconnected and the blade has stopped rotating. Remove one grill and wipe blade and interior shell housing clean of debris with a damp cloth and mild liquid soap. Dry all parts thoroughly. DO NOT PRESSURE WASH THE FAN. Replace grill prior to next operation. 3. Contact Pinnacle Climate Technologies directly for Fan maintenance or repair not described in this manual (or if you are unsure whether maintenance is required) at [phone] or at www.pinnacleclimate.com. SERVICE 1) Refer to the TROUBLESHOOTING GUIDE in this Manual.
DO NOT OPERATE THE FAN WITHOUT THE INLET AND OUTLET GRILL PROPERLY IN PLACE.
DANGER
MOTOR SPECIFICATIONS* A B Voltage 115/100V AC-- 220/240V AC-- Frequency 60/50 Hz 50Hz Phase Single Single Electric Motor 1 HP 1 HP (.75kW) Current (amps) 8.0/5.7 4.2 R.P.M 3300/2800 2850 Watts 615W@115V 670W @230V Free Air (cfm) 2796 (79.2m³) 2492 (70.6m³) Max S.P. 3" 2.5" (68mm) *Tested in accordance with ANSI/AMCA 230-99 as circulation fans. AIR FLOW RATES (115V AC) (230V AC) Feet Description CFM M³/Min CFM M³/Min Free Air 2143 60.7 1845 52.2 15' duct Straight 1938 54.9 1722 48.8 25' duct Straight 1809 51.2 1698 48.1 25' duct 1-90° bend 1728 48.9 1451 41.1 25' duct 2-90° bends 1472 41.7 1181 33.4 40' duct Straight 1764 50.0 1556 44.1 50' duct Straight 1600 45.3 1422 40.3 50' duct 1-90° bend 1521 43.1 1396 39.5 50' duct 2-90° bends 1510 42.8 1239 35.1 75' duct Straight 1135 32.1 1111 31.5 The published ow rates are intended to serve only as a reference. Manufacturing tolerances, duct type, and specic operating parameters will affect the overall ow rate(s) for each particular Fan.
THE AIR FLOW RATE DECREASES AS THE LENGTH OF DUCT INCREASES FOR BOTH BLOWING AND SUCTION APPLICATIONS. AIR FLOW RATES WILL VARY WITH SPECIFIC DUCT TYPES AND MANUFACTURERS.
CAUTION
5
2
GENERAL INFORMATION & DIMENSIONS Type Axial Duct adapter 12" dia. (30 cm) Height 21" (53.34 cm) Width 14" (35.65 cm) Length 17" (43.18 cm) Weight 32.5 lbs (14.74 kg)