Product Manual

INTRODUCTION
Congratulations on your selection of a new Vane Axial Fan from Schaefer Ventilation. Our goal is to provide
you with the very best in high performance air ventilators. Reading this Owner's Manual will help you achieve
the maximum benefit from your portable air ventilator. If you do not understand any portion of this Manual
please contact Schaefer, or your authorized Schaefer dealer for proper assistance prior to operating this Fan.
Do not allow anyone to operate the Vane Axial Fan without first reading the Operator's Manual and becoming familiar with its
operation. Schaefer has endeavored to provide you with the finest equipment available for providing air for portable
ventilation purposes. The possibility does exist, however, that the Vane Axial Fan can be subjected to applications not
intended by Schaefer. Misuse and/or misapplication of the Vane Axial Fan can lead to the possibility of serious
damage, injury or even death. Anyone operating the Vane Axial Fan should refer to current OSHA job safety and health
rules and regulations pertaining to the construction industry, with a particular emphasis on 29 CFR 1910, which contains
rules governing Permit-Required Confined Spaces for General Industry.
Record the Vane Axial Fan model and serial number in the space provided below.
Model No.____________________ Serial No. ________________________ Date Purchased ______________________
All specifications are general in nature and are not intended for specific application purposes. Schaefer accepts no
responsibility for variations which may be evident in actual products, specifications, pictures and descriptions contained in
this publication.
MAINTENANCE
DANGER
ALWAYS SHUT OFF THE FAN AND UNPLUG IT FROM ITS POWER SOURCE TO PREVENT ACCIDENTAL STARTING
AND THE POSSIBILITY OF ELECTRICAL SHOCK AND/OR ELECTROCUTION. BE SURE THE FAN BLADE HAS
STOPPED ROTATING BEFORE PLACING ANY OBJECTS OR FINGERS NEAR THE FAN GRILL.
I. Visually check all fasteners and individual components for loose or broken parts. Tighten or replace items as required, with
genuine, factory approved replacement parts only.
2. Keep the Fan blade clean from debris. Accumulation of dust, dirt, paint, etc. on the Fan blade will throw the blade rotation
out of balance resulting in damage. To clean the Fan blade, be sure the plug is disconnected and the blade has stopped
rotating. Remove one grill and wipe blade and interior shell housing clean of debris with a damp cloth and mild liquid soap.
Dry all parts thoroughly. DO NOT PRESSURE WASH THE FAN. Replace grill prior to next operation.
DANGER
DO NOT OPERATE THE FAN WITHOUT THE INLET AND OUTLET GRILL PROPERLY IN PLACE.
3. Contact Schaefer directly for Fan maintenance or repair not described in this manual (or if you are unsure whether
maintenance is required.) at Tel# [phone] or at www.schaeferfan.com.
SERVICE
1) Refer to the TROUBLESHOOTING GUIDE in this Manual.
MOTOR SPECIFICATIONS GENERAL INFORMATION & DIMENSIONS
AB
Voltage 115V AC-- 230V AC-- Type Axial
Frequency 60/50 Hz 50Hz Duct adapter 12" dia. (30 cm)
Phase Single Single Height 21" (53.34 cm)
Electric Motor 1 HP 1 HP (.75kw) Width 14" (35.65 cm)
Current (amps) 8/5.7 4.2 Length 17" (43.18 cm)
R.P.M 3300/2800 2850 Weight 32.5 lbs (14.74 kg)
Watts 615W@115V 670W @230V
Free Air (cfm) 2796 (79.2m³) 2492 (70.6m³)
Max S.P. 3" 2.5" (68mmlaq)
AIR FLOW RATES
(115V AC) (230V AC)
Feet Description CFM M³/Min CFM M³/Min
Free Air 2796 79.2 2492 70.6
15' duct Straight 1938 54.9 1722 48.8
25' duct Straight 1829 51.8 1646 46.6
25' duct 1-90° bend 1564 44.3 1344 38.1
25' duct 2-90° bends 1377 39.0 1232 34.9
40' duct Straight 1764 50.0 1556 44.1
50' duct Straight 1567 44.4 1173 33.2
75' duct Straight 1254 35.5 1094 31.0
The published flow rates are intended to serve only as a reference. Manufacturing tolerances, duct type, and specific
operating parameters will affect the overall flow rates(s) for each particular Fan.
CAUTION
THE AIR FLOW RATE DECREASES AS THE LENGTH OF DUCT INCREASES FOR BOTH BLOWING AND
SUCTION APPLICATIONS. AIR FLOW RATES WILL VARY WITH SPECIFIC DUCT TYPES AND
MANUFACTURES.