User`s manual

Options and Accessories
Your Pro-Kool
®
Evaporative cooler can be purchased with certain options and/or accessories, and some of
these can be retrofitted to your Pro-Kool
®
after the initial purchase. Instructions are included with all equipment
purchased separately from your Pro-Kool
®
.
Options and accessories available at time of purchase or after purchase:
• Pneumatic Wheels
• Water Conditioner and Cleaner
PNEUMATIC WHEELS
Pneumatic wheels are available at the time of your Pro-Kool
®
purchase or as a retrofit
kit on a previously purchased Pro-Kool
®
.
The pneumatic wheel options includes two locking and two non-locking wheels.
Pneumatic wheels are designed to allow for easy rolling on rough or uneven surfaces.
11
WATER CONDITIONER
Pro-Kool
®
Water Condition is
recommended to control
odors found to be present in
some water sources.
• Place the tab under the
float valve water outlet for
fast, effictive odor control.
• Place the tab next to the
pump for longer lasting
odor control.
CLEANER
Pro-Kool
®
Cleaner is recommended to
remove scale buildup from the water
supply system.
• Follow the instructions on page 9 to
clean the unit. Refill with water and add
one pint of Cooler Cleaner Treatment
to the reservoir. Operate the Pro-Kool
®
in PUMP ONLY mode for approximately
20 minutes.
• Drain, clean and refill the Pro-Kool
®
with fresh water. Repeat steps if
necessary. Repeat treatment when
scale buildup becomes evident.
actoolsupply.com
actoolsupply.com