Elektrotechnik Elektronik Gebrauchsanleitung operating manual GAS ALARM GX-A1+CO Prof. CO-Melder mit externem Sensor Prof. CO detector with external sensor Art.-Nr. / item no. 300266 www.elektrotechnik-schabus.
DE Gebrauchsanleitung HERZLICHEN DANK FÜR IHR VERTRAUEN! Um eine stets optimale Funktion und Leistungsbereitschaft für das Produkt zu garantieren und um Ihre persönliche Sicherheit zu gewährleisten, haben wir eine Bitte an Sie: Lesen Sie vor Montage und ersten Inbetriebnahme diese Gebrauchsanleitung gründlich durch und befolgen Sie vor allen Dingen die Sicherheitshinweise! Die Gebrauchsanleitung ist Bestandteil dieses Produktes. Bewahren Sie diese zum Nachlesen auf! 1.
3. BESTIMMUNGSGEMÄSSE VERWENDUNG Der GAS ALARM GX-A1-CO ist eine Kombination aus ext. CO-Sensor und Steuergerät für Kohlenmonoxid und warnt bei CO-Konzentrationen, die in der DIN EN 50291 (CO in Wohnräumen) festgelegt wurden. Dieses Überwachungssystem ist deshalb seinem Zweck entsprechend sehr empfindlich eingestellt. Dieses CO-Gaswarngerät darf nur zusammen mit dem beigelegten CO-Sensor verwendet werden. Eine LCD-Anzeige informiert Sie ständig über den Betriebszustand.
4.3 Anschlussbelegung Sensor Beachten Sie die Farbbelegung des Sensorkabels, siehe 4.5 Anschlussbeispiel, S = weiß / M = braun / +24 = grün / +5 ist nicht belegt 4.4 Anschlussbelegung Relais Bei Anschluss von Zubehörgeräten an den potenzialfreien Relais ist zu beachten, dass der Schaltstrom von 5 Ampere nicht überschritten werden darf.
5. INBETRIEBNAHME / FUNKTIONSTEST Eine elektrische Funktionsprüfung erfolgt beim Anlegen der Netzspannung, dann wird eine kurze Initialisierungsphase gestartet, bis der Sensor überprüft und der Sensorselbsttest erfolgreich absolviert wurde. Die Displaymeldung CO : Ready bestätigt den erfolgreichen Test. Beachten Sie: Auch bei kürzerem Netzausfall, wird die Funktionsprüfung erneut gestartet. Zu Ihrer Sicherheit empfehlen wir, die Anlage regelmäßig auf Ihre Funktion zu überprüfen! 5.
6. TECHNISCHE DATEN Betriebsspannung: Leistungsaufname: Sensorbetriebsspannung: Sensortechnologie: Lebensdauer Sensor max.: Relaiskontakt Alarm: Relaiskontakt Störung: Schalldruck Steuergerät und Sensor: Software Version: Funktionsbereich Steuergerät: Funktionsbereich Sensor: Schutzart: Abmessungen Steuergerät: Abmessungen Sensor: Abmessungen Kabel: 100 - 240 V AC / 50-60 Hz max. 10 VA, je nach Betriebszustand, typisch 3 - 5 VA 24 Volt, max.
7.3 Gewährleistung Auf Ihr elektronisches Produkt von Elektrotechnik Schabus gewähren wir auf Materialfehler und Qualitätsmängel eine gesetzliche Gewährleistung ab Kaufdatum.
Elektrotechnik Elektronik operating manual GAS ALARM GX-A1+CO Prof. CO detector with external sensor item no. 300266 www.elektrotechnik-schabus.
THANK YOU VERY MUCH FOR YOUR TRUST! In order to guarantee the optimal function and readiness to perform for the product at all times and to ensure your personal safety, we have one request for you: Read these instructions for use carefully before installation and initial start-up and, above all, follow the safety instructions! The instructions for use are part of this product. Keep these for future reference! 1. SCOPE OF DELIVERY ► ► ► ► 1 control / display unit GX-A1 + CO 1 ext.
3. INTENDED USE The GAS ALARM GX-A1-CO is a combination of ext. CO sensor and control unit for carbon monoxide and warns of CO concentrations that were specified in DIN EN 50291 (CO in living spaces). This monitoring system is therefore set to be very sensitive in accordance with its purpose. This CO gas warning device may only be used together with the enclosed CO sensor. An LCD display constantly informs you about the operating status.
4.3 Sensor connection assignment Note the color coding of the sensor cable, see 4.5 Connection example, S = white / M = brown / +24 = green / +5 is not used 4.4 Relay pin assignment When connecting accessory devices to the potential-free relay, make sure that the switching current of 5 amperes must not be exceeded.
5. COMMISSIONING / FUNCTIONAL TEST An electrical function test is carried out when the mains voltage is applied, then a short initialization phase is started until the sensor is checked and the sensor self-test has been successfully completed. The display message CO: Ready confirms the successful test. Please note: The function test is restarted even after a brief power failure. For your safety, we recommend using the system to check their function regularly! 5.
6. TECHNICAL DATA Operating voltage: 100 - 240 V AC / 50-60 Hz Power consumption: max. 10 VA, depending on the operating status, typically 3 - 5 VA Sensor operating voltage: 24 volts, max. 50 mA (green + / brown -) Sensor technology: electrochemical Lifetime sensor max .: 6 years @ max. 40 ° C + min. 40% rH 10 years @ max. 28 ° C + min.
7. GENERAL Elektrotechnik Schabus GmbH & Co. KG is not liable for damage and / or loss of any kind, such as individual or consequential damage, resulting from the gas detector not giving an alarm signal despite the increased gas concentration. In order to be able to guarantee perfect functionality at all times, you should have the sensor checked after 5 years to be on the safe side, or replaced after 10 years at the latest. 7.
7.5 Environmental information The production and use of natural raw materials was necessary to manufacture the product you purchased. It may contain substances that are hazardous to health and the environment. To avoid the spread of these substances in your area and to save natural resources, we ask you to use the appropriate take-back systems. Thanks to these systems, the materials in your product can be reused in an environmentally friendly way at the end of its service life. (WEEE no .