User manual

SCH.E.I.D.L Energy Controller
Page 19 of 40
Installation Manual Data-Logger
EN
1
Connect the meter
S
0
Counter Adapter IS0
for e lect ricit y, water, heat quantities
or drinking water meter, length: 0.2 m
Order Code: 4 260376 260040
1 Bus for senso r
2 S
0
+
3 S
0
- / Ground
4 +12V Output
The optional adapter allows a mea-
surement of co nsumpt ions. P rerequi-
site is a meter with S
0
output to record
the pulses.
Several adapter, also mixed with
temperature sensors can be daisy-
chained t o a single bus cable.
In C HP, heat pumps, or for loads, the
running t imes and the efficiency can
be det ermined .
S
0
Counter Adapt er
2
Connect the adapter
2.1 Put the adapter on your
controller. A green LED on the
adapter flashes with each
pulse
1.1 Connect the terminals S
0
+ a nd
S
0
- of the meter with those of
the adapter.
Warning Danger: Don´t connect
3
Instruments display
3.1 After about some seconds,
the instruments for power
[kW] and summed energ y
[kWh] appear
3.2 In Settings → Datapoints →
Meter, adapt the pulses / kWh
and unit s
the 230V of a power meter to
the S
0
adapter! Connection
only by qualifie d personal
Accessories