User manual

SCH.E.I.D.L Energy Controller
Page 18 of 40
Installation Manual Data-Logger
EN
Buffer temperature sensor 3-way
for h ot water tank
Length: 2.5 m, for 2 m high buffer
Order Code: 4 260376 260071
The optional multi-sensor allows pre-
cise monit oring of heat-st oring e.g. fo r
drinking w ate r, Solar stratified storage
tank or in cogeneration plants. The
stratification is detected by three sen-
sors th at are plugged together via a
cable. Thanks to the magnetic at-
tachment to the tank, the sensors are
easy t o install.
Is rep resent ed with the temperat ures
of t he buffer layer, the energy contai-
ned in kWh, and the charge / dischar-
ge power in kW.
Since the buffer is the central compo-
nent of mod ern regulated heating in-
stallations, storage losses and losses
in t he system can be found quickly.
1
Mechanically fasten
Buffer temperature sensor
2
Connect the buffer temperature sensor
2.1 Put on the buffer temperature
sensor t o the controller, if ne-
cessary behind other sensors
1.1 Baste the magnetic sensor at
the top (wi th flags), cent er and
bottom directly on t he steel
tank under insulat io n
3
Instruments display
3.1 The instruments of power,
energy and temperat ure s
appear in the dashboard
3.2 In Settings → Datapoints →
Buffer, set the volume and
temperatures
Accessories