™ Wireless Mobile Speaker By SCEPTRE® | User’s Manual |
Safety Information Please read this user’s manual Please take the time to follow the instructions in this user’s manual carefully. It will help you to properly use your new Sceptre® product and enjoy its features. Please save this user’s manual for future references. CAUTION AVIS RISK OF ELECTRICAL SHOCK DO NOT OPEN RISQUE DE CHOC ÉLECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICABLE PARTS INSIDE.
Safety Information WARNINGS and CAUTIONS • To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The product shall not be exposed to dripping or splashing, and objects filled with liquids, such as vases, shall not be placed on or near the product. As with any electronic products, use care not to spill liquids into any part of the product. Liquids can cause a failure and/or a fire hazard. • The power supply must be used indoors only.
Safety Information product. • The cells in the batteries perform best when operating at normal room temperature, 70°F (20°C). • Do not replace the internal battery on your own. Do not replace the internal battery with third party batteries. Sceptre cannot warrant the safety and compatibility or assure the operability of batteries from other manufacturers for use in operating the SoundPal™. • Long-term exposure to loud music may cause hearing damage.
Safety Information Important Safety Instructions . . 3. 4. . 6. 7. Read these instructions – for all components before using this product. Keep these instructions – for future reference. Heed all warnings – on the product and in the user’s guide. Follow all instructions. Do not use this apparatus near water or moisture – Do not use this product near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool, or anywhere else that water is present.
Safety Information . See product enclosure for safety-related markings. 6. Use proper power sources – Plug the product into a proper power source, as described in the operating instructions or as marked on the product. The SoundPal™ Wireless Mobile speaker complies with FCC and Industry Canada RF radiation exposure limits set forth for general population. The system must not be colocated or operating in conjunction with any other antennas or transmitters.
Contents Safety Information 1 Overview 7 Package Contents 7 Charging the SoundPal™ 8 LED Indicator Light 8 Function Buttons 9 Pairing with Bluetooth® Devices 10 Auto-connect with NFC - Bluetooth® 10 Connecting with Other Devices 10 Cleaning the Speaker 11 Frequently Asked Questions 12 Call Us If You Need Help 12 Specifications 13 Disclaimers 13
Introduction Overview Thanks for purchasing Sceptre’s wireless mobile speaker SoundPal™. You can now enjoy music or news wirelessly from your Bluetooth® enabled smartphone, tablet, or laptop. Features • Wireless Bluetooth® link eliminates the need to dock or physically connect your Bluetooth® device. • Rechargeable lithium-ion battery provides hours of music playing. • Built-in Micro-SD card reader for an alternative way of playing music files.
Operation Charging the SoundPal™ Before using your wireless mobile speaker for the first time, you need to charge the internal battery by connecting it to a computer with USB port or an AC charger (not included) with compatible power ratings (refer to the power rating sticker on the speaker). Micro SD Micro SD DC 5V Line In LED Indicator Light The SoundPal’s LED status indicators are located at the top of the speaker. They illuminate to indicate power and other functions.
Operation Function Buttons The function buttons are located at the top of the speaker. . 1 2 3 4 5 67 6. 7. and hold to disconnect from your current Bluetooth® device. - Press to switch between Bluetooth®, Micro-SD, and Line in modes. - Press to turn on or turn off the speaker. LED Indicator - Illuminates to show various functions of the speaker. 1 2 3 4 5 67 Micro SD e In Lin DC o SD Micr Micro SD DC 5V 5V Line In DC 5V 8 9 10 Line In e In Lin . . 3. 4.
Operation Pairing with Bluetooth® Devices Auto-connect with NFC - Bluetooth® Pairing occurs when two Bluetooth® devices communicate with each other and establish a connection. A record of information about this connection is then stored in the memory of each device. Once you pair a device with the SoundPal™ speaker you should not have to pair it again. . To begin pairing with a Bluetooth® device 3. 4. . . . 3. 4. 5. Press to turn on the speaker. You will see the LED flash blue.
Operation and Maintenance To connect to a portable music player . . 3. 4. . . Obtain a 3.5mm stereo cable and plug one end into your portable music player. Plug the other end of the cable into your SoundPal speaker. Press to turn on the speaker. Turn on your music player to play music. If the LED is flashing blue, the speaker is under pairing mode. Press to switch to Line-in mode. To connect two SoundPal speakers to a TV . . 3. To play music files with a Micro-SD card . . 3. 4.
Maintenance Frequently Asked Questions . Q: What do I do if the speaker does not turn on? A: Most likely the battery does not have any power left. Plug the speaker into a power source to charge the speaker. 3. Q: What do I do if the Bluetooth® device is not connecting? A: Please try the following methods by themselves. . If the device is asking for a passkey use “0000”. . Turn the speaker on and off. 3. Turn the Bluetooth® on and off from your device. 4.
Maintenance Specifications Power Input 5V DC, 1A (MAX) Dimension 8.5” (L) x 2.4” (H) x 2.8” (D) Storage Temperature 32 ~158 °F (0 ~ 70 °C) Operating Temperature 50 ~110 °F (10 ~ 43 °C) Bluetooth® 2.1 + NFC Disclaimers • The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any sue of such marks by Sceptre Inc. is under license. • Sceptre is a registered trademark of Sceptre Group. • Sceptre, Inc.
SCEPTRE © 2013 Sceptre Inc. 16800 East Gale Ave. City of Industry, CA 91745 Website : www.SCEPTRE.
