User manual

- 8 -
www.SCEPTRE.com
SCEPTRE X505 HDTV User Manual
Attaching or Removing the Stand
1. To attach the stand place the display unit flat on a table. Afterwards attach the
neck piece onto the display and screw in the 4 fine threaded screws to secure the
neck.
2. Attach the plastic ring to the bottom of the stand and the metal plate to cover up
the plastic ring. Make sure to match the 3 holes / metal pin on the metal plate to 3
holes / guard rail on the bottom of the base. Finally screw in the 5 thick threaded
screws to secure the stand.
3. To remove the stand, remove the 4 fine threaded screws indicated in the picture
and the stand will come off.