User Manual

- 26 -
www.SCEPTRE.com
SCEPTRE C32 Display User Manual
Problem
Possible solutions
THE WORDS ARE
TOO SMALL AT
1920 x1080
At the native resolution of 1920 x1080, some people might
feel that the words are too small to read. You can change
the size of the words in Windows Operating System via its
display properties.
For Windows XP
1. Right click on the background with nothing
selected. Left click on the PROPERTIES option.
2. Click on the SETTINGS tab.
3. Under SETTINGS, click on the ADVANCED
button.
4. Under GENERAL tab, change the size of the
words by selecting the option NORMAL SIZE and
change it to LARGE SIZE.
5. Click on OK on all windows to exit.
6. Once you have finished rebooting, the computer is
ready for use.
For Windows VISTA or Windows 8 or Windows 10
1. Right click on the Wallpaper. Left click on the
PERSONALIZE option.
2. Click on ADJUST FONT SIZE (DPI) option on the
left column and
3. Click on CONTINUE.
4. In there you can change the size of the words by
changing from the option DEFAULT SCALE to
LARGE SCALE.
5. Click on APPLY to finalize your selection.
6. Once you have finished rebooting, the computer is
ready for use.
I CANNOT GET
240HZ REFRESH
RATE USING HDMI
240Hz is only supported under DP connection on the
monitor. Please use a DisplayPort cable to connect from
your computer’s video card to the monitor in order to obtain
240Hz refresh rate.
I CANNOT GET
HIGHER THAN 60HZ
REFRESH RATE
Check under device manager of your computer to see if the
monitor is recognized as “generic pnp monitor”. If not you’ll
need to remove the existing monitor then reinstall your video
card driver. Also make sure your video card driver is
updated to the newest version possible.