User's Manual

Page36 SCEPTRE X23
THE VIDEO IS
TOO BRIGHT NO
MATTER WHAT I
ADJUST
Sometimes having older video cards this type of
problem might happen due to newer LCDs having to
provide HD video capability and not being fully
compatible with older video cards. You can try
adjusting the video card’s options in the computer but
ultimately you’ll need to upgrade your video card.
THE WORDS AND
VIDEO ARE TOO
BLURRY
Are you using the monitor’s native resolution? If not
you’ll need to switch resolution to the native 1360x768
at 60 Hz to make the words clearer. If you’re using
VGA please do not forget to AUTO ADJUST.
If the words are still blurry, please try enabling or
disabling CLEAR TYPE function from windows.
THE COLORS
ARE NOT
CORRECT
Sometimes the colors are not correct because your VGA
or DVI cable is loose or corrupt. Please try
reconnecting your cable or swap out your current cable
to see if the problem persists.
How do I clean the LCD?
IMPORTANT
1. The power cable has to be removed from the socket before cleaning the TV.
2. Do not use volatile solvent (alcohol, rosin, and toluene) to clean the TV. These types
of chemicals might damage the housing and the LCD glass.
Cleaning the bezel and remote control
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. If the remote control or bezel is dirty to the point where you cannot simply dry wipe it,
please lightly dampen the wiping material with clean water and wipe again. Wipe the
display with a dry micro-fiber cloth or 100% cotton cloth afterwards.
Please Note :
• Make sure you wring the water out of the cloth before cleaning the
bezel or remote in order to prevent water from penetrating into the
electronics.
Cleaning the Screen
1. Use a 100% cotton cloth or micro-fiber cloth for cleaning.
2. The LCD screen glass is extremely fragile. Do not scrape it with any material. Do
not press or tap the screen to avoid cracking. When the screen is dirty to the point
where you cannot simply dry wipe it, please lightly dampen the wiping material with
clean water and wipe again. Wipe the display with a dry micro-fiber cloth or 100%
cotton cloth afterwards.