X9G-NagaV X9S-NagaV User’s Manual
FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
The Federal Communications Commission warns that changes or modifications of the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE mark for Class B ITE (Following European standard EN55022/1998; EN610003-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A2+A3+A4+A11) Radio Frequency Interference Statement Warning: This is a Class B product.
TABLE OF CONTENTS TABLE OF CONTENTS ..........................................................................................
The LCD Monitor Your New LCD Monitor Your LCD Monitor has been designed to be versatile, ergonomic and user-friendly. The LCD Monitor is capable of displaying most standards, from 640x400 VGA to 1280x1024 SXGA. The digital controls located on the front panel allow the user to easily adjust the Monitor’s display parameters, and the LCD Monitor’s small footprint gives you more room in your workspace for other peripherals. Lightweight and compact, the LCD Monitor is the perfect solution for users on the go.
After unpacking your LCD monitor, make sure the following items are included in the box and are in good condition: • LCD monitor • Power Cord • Monitor-To-PC Analog signal cable 15pin • Monitor-To-PC DVI signal cable • User’s manual If you find that any item to be missing or appear to be damaged, contact your dealer immediately. Do not throw away the packing material or shipping carton in case you need to ship or store the LCD monitor in the future. 2 Rev.
Identifying Components A. The LCD Monitor — Front View 3 1 4 2 Figure 1-1: The LCD Monitor Front View 1. Power-On Indicator This Circular LED indicator green lit when the power is on and orange lit when the LCD monitor is in power-saving mode. 2. Monitor Stand 3. LCD Screen The LCD monitor screen is a 19-inch TFT 1280 x 1024 screen. 4. LCD Monitor Control Panel Refer to Chapter 2 for more details. 3 Rev.
B. "Hot Keys" for Quick Adjustment of Monitor Settings + P Figure 1-2: "Hot Keys" 1. Brightness Adjustment "hot key": Press this + button to allow you to adjust the brightness of the LCD Monitor directly Brightness 50 2. Contrast Adjustment “ Hot key” Contrast Press this - button to allow you to adjust the contrast of the LCD Monitor directly 50 3.
Adjusting the Tilting Angle The LCD Monitor’s angle settings range from 0° to 10°. 0 to 10 Figure 1-3: Tilting the Monitor 5 Rev.
Connecting AC Power and Video Cable Note: Turn off your PC and the LCD monitor before connecting your LCD monitor to the computer. AC-IN AC Outlet (Wall Socket) Computer Power Cord Monitor Power Cord DVI VGA Figure 1-4: The AC Adapter Power Management System This LCD Monitor complies with the VESA DPMS power management proposal. When the LCD Monitor is in power-saving mode or detects an incorrect timing, the monitor screen will be blank and the power LED indicator from green lit change to orange lit.
How to install the detacheable stand: Please see the below drawing. 7 Rev.
The Display Controls The LCD Monitor’s Control Panel + P Figure 2-1: The Control Panel 1. : Enable the OSD Menu button or / Move the cursor to the left (when OSD is enabled) 2. : Move the cursor to the Right ( When OSD is enabled) / Auto-adjustment hot key 3. - : Enter into the sub-menu or decrease the value / Contrast hot key 4. + : Enter into the sub-menu or increase the value / Brightness hot key 5. : Power Switch This button lets you turn power for the LCD monitor ON or OFF. 8 Rev.
Adjusting the Monitor’s Display OSD Main Menu 1. Pressing the Y button causes the screen below to appear. 2. Use the Y &Z key to select the desired group, then press – or + key to enter into sub-menu 3. Repeat step 2 to select the changed item, then – or + to change the value. Main Menu Sub Menu Monitor Control Description OSD Main SCREEN 9 Rev.
Monitor Adjustment Allow you to adjust the LCD monitor’s display settings. Press the Adjustment control button to display the submenu. Use the Function Select button to select one of the following submenu options: Auto Adjustment ( For VGA port only, DVI port can’t adjustment ) Press the Adjustment control button to let the monitor determine and select the setting that is most appropriate for your system requirements.
text and graphic display modes. PORT-SELECT: To switch between analog and DVI port for PC signal input EXIT: To exits the Monitor-Control submenu OSD-control The OSD-Control menu lets you adjust the position of the OSD on the screen. Press the Adjustment control button to display the submenu. OSD-H-POSITION: To change the position of the OSD on a horizontal plane. OSD-V-POSITION: To change the position of the OSD on a vertical plane.
GRAPHIC-CONTROL: The Graphic-Control option lets you make adjustments that effect the contrast, brightness and color of the LCD monitor’s display. CONTRAST: To adjust the contrast level of the display screen BRIGHTNESS: To adjust the light level on the display screen. COLOR: To select the LCD monitor’s color display. The available options are cold, warm and User. Selecting the user option lets you make individual adjustments to the R, G and B items.
To reset the entire Graphic-Control submenu settings to the factory default. EXIT: To exit the Graphic-Control submenu. MISC-CONTROL: The Misc-Control menu option lets you select the OSD display language, adjust the audio volume setting and view system information. LANGUAGE: The supported languages include German, English, French, Spanish, Italian and Japanese INFORMATION: To indicate display mode timings and firmware version. EXIT: To exit the Misc-Control submenu.
Note: 1) No video No video When the monitor is ON and there is no video signal received, the following message will be displayed 2) Signal out of range When the frequency range of the signal is out of the Monitor’s specifications, (over 85HZ) the display will show the following message Over Range 14 Rev.
Appendix A TFT LCD Monitor Specifications Item Specification LCD Panel 19" SXGA Control Functions Power On-Screen Display (OSD) Software Power switch with LED indicator (ON/OFF) Main Menu MONITORCONTROL OSD-CONTROL MISC-CONTROL GRAPHICCONTROL Submenu Auto Adjustment, H-POSITION, VPOSITION, PHASE, CLOCK, GRAPHIC/TEXT, PORT-SELECT, RESET, EXIT OSD-H-POSITION, OSD-VPOSITION, OSD-TIMER, EXIT LANGUAGE, INFORMATION, EXIT CONTRAST, BRIGHTNESS, COLOR, COLOR R, G and B ADJUST, AUTO LEVEL, RESET, EXIT EXIT Dis
Item Specificaiton Scanning Frequency H/V, Hz 24-80K 50-75 Power Management Meets VESA DPMS Power Consumption (ON/OFF, W) 34W/1W Max. Dimensions WxHxD (420.2 x 419.04 x 175mm) Net Weight (approx.) 11 lbs (5 Kg) Power Supply Environment 16.54 x 17.4 x 6.89 in. Universal Input AC Socket Operating Temperature: 32 to 104°F (0 to 40° C) Relative Humidity: 10% to 90% Regulatory FCC B DoC,UL/cUL,Energy star 16 Rev.
Appendix B Supported Timing Item Standards Resolution Dot Clock (MHz) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 NEC PC98 MAC 13" mode MAC 16" mode MAC 17" mode VGA VGA VGA VESA VESA VESA SVGA VESA VESA VGA XGA VESA VESA VESA VESA 640x400 640x480 832x624 1024x768 640x350 640x400 640x480 640x480 640x480 800x600 800x600 800x600 800x600 720x400 1024x768 1024x768 1024x768 1280X1024 1280X1024 21.05 30.24 57.28 80.00 25.18 25.18 25.18 31.50 31.50 36.00 40.00 50.00 49.50 28.32 65.00 75.00 78.
Appendix C Troubleshooting This LCD monitor comes pre-adjusted with standard VGA timing. Due to output timing differences among various VGA cards, you may initially experience an unstable or unclear display when a new display mode or new VGA card is selected. Before applying any of the following troubleshooting procedures, you should first apply the Auto Adjust option in the OSD menu.
Change to one of the alternate modes listed in Appendix B, or replace the VGA card and repeat steps 1 and 2. 4. If the power LED is not lit, check that the AC power connector is securely connected, and verify that the AC adapter LED is lit. If the AC adapter LED is not lit, please contact your dealer for assistance. PROBLEM: The LCD displays “signal out of range” error message 1.
