SDS

Auto Expressions Vent Fresh (All Flavors and Varieties)
MSDS# 402424LU
Version 1.0
Effective Date 08/18/2008
Material Safety Data Sheet
According to OSHA Hazard Communication Standard, 29 CFR
1910.1200
3/6
Print Date 10/22/2008 MSDS_US
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Occupational Exposure Limits
Contains no components with occupational exposure limit values.
Additional Information
: Adequate ventilation to control airborne concentrations below
the exposure guidelines/limits.
Exposure Controls
: No exposure controls are ordinarily required under normal
conditions of use. It is good general industrial hygiene practice
to minimize exposure to the material.
Personal Protective
Equipment
: Not applicable.
Respiratory Protection
: No respiratory protection is ordinarily required under normal
conditions of use.
Hand Protection
: Not normally required.
Eye Protection
: Eye protection is not required under normal conditions of use.
If material is handled such that it could be splashed into eyes,
protective eyewear is recommended.
9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance : Various colours. Liquid.
Odour : Strong.
Initial Boiling Point and
Boiling Range
: 176 °C / 349 °F
Flash point : > 50 °C / 122 °F
Specific gravity : 0.8
Water solubility : Insoluble.
n-octanol/water partition
coefficient (log Pow)
: 4.232
10. STABILITY AND REACTIVITY
Stability
: Stable under normal conditions of use.
Conditions to Avoid
: Open flame.
Materials to Avoid
: Not applicable.
Hazardous Decomposition
Products
: None expected under normal use conditions.
Hazardous Polymerisation
: No
Sensitivity to Mechanical
Impact
: No
11. TOXICOLOGICAL INFORMATION
Basis for Assessment
: Information given is based on data from components.
Acute Oral Toxicity
: Expected to be of low toxicity: LD50 >2000 mg/kg , Rat