SDS

Auto Expressions Vent Fresh (All Flavors and Varieties)
MSDS# 402424LU
Version 1.0
Effective Date 08/18/2008
Material Safety Data Sheet
According to OSHA Hazard Communication Standard, 29 CFR
1910.1200
2/6
Print Date 10/22/2008 MSDS_US
The onset of respiratory symptoms may be delayed for several
hours after exposure.
Aggravated Medical
Condition
: Pre-existing medical conditions of the following organ(s) or
organ system(s) may be aggravated by exposure to this
material: Skin.
Environmental Hazards
: Expected to be toxic to aquatic organisms. May cause long-
term effects in the environment.
Additional Information
: Under normal conditions of use or in a foreseeable emergency,
this product meets the definition of a hazardous chemical when
evaluated according to the OSHA Hazard Communication
Standard, 29 CFR 1910.1200.
4. FIRST AID MEASURES
General Information
: Keep victim calm. Obtain medical treatment immediately.
Inhalation
: No treatment necessary under normal conditions of use.
Skin Contact
: If persistent irritation occurs, obtain medical attention. Remove
contaminated clothing. Immediately flush skin with large
amounts of water for at least 15 minutes, and follow by
washing with soap and water if available. If redness, swelling,
pain and/or blisters occur, transport to the nearest medical
facility for additional treatment.
Eye Contact
: Flush eye with copious quantities of water.
Ingestion
: In general no treatment is necessary unless large quantities
are swallowed, however, get medical advice.
Advice to Physician
: Consult a Poison Control Centre for guidance. If skin
sensitisation has developed and a causal relationship has been
confirmed, further exposure should not be allowed.
5. FIRE FIGHTING MEASURES
Clear fire area of all non-emergency personnel.
Flash point
: > 50 °C / 122 °F
Specific Hazards
: Combustible.
6. ACCIDENTAL RELEASE MEASURES
Protective measures
: Remove all possible sources of ignition in the surrounding
area. Prevent from spreading or entering into drains, ditches or
rivers by using sand, earth, or other appropriate barriers.
Clean Up Methods
: Soak up residue with an absorbent such as clay, sand or other
suitable material and dispose of properly.
Additional Advice
: Observe all relevant local and international regulations.
7. HANDLING AND STORAGE
General Precautions
: Use local exhaust ventilation if there is risk of inhalation of
vapours, mists or aerosols.
Handling
: Use only in well-ventilated areas.
Storage
: Keep in a cool place.