User guide

48 CATx KVM Extender Range
Appendix B: Rack Mount Options
Most of the extender units can be mounted in a 19” rack using one of the two
mounting kits:
• SDBR3
• SDBR1
SDBR3 Mounting Kit
SDBR3 allows you to mount up to three of the following units across 1U:
Remote Units:
SDBX/S1 SDBX/D1 SDBX/SA1 SDBX/DA1 SDBX/S2
SDBX/SA2 SDBX/R1 SDBX/R2 SDBX/RA1 SDBX/RA2
SDBX/R4 SDBX/RA4
Local Units:
SDBX/S2 SDBX/SA2
The kit contains one rack plate and M3 countersunk mounting screws.
To mount a unit:
1. Remove the feet from the extender unit.
2. Align the holes on the base plate with the vacant screw holes on the base of
the extender unit.
3. Fasten the base of the unit to the plate of the mounting kit using the
supplied screws.
Figure 19 SDBR3 Mounting Kit