User guide

36 CAT5/5e KVM Extender Range
Appendix B: Rack Mount Options
Extender units can be mounted in a 19” rack using the mounting kits:
• SDBR1
• SDBR2 (for Local Units supplied with SDLink2/S only)
Each kit consists of two angled brackets.
To mount a unit:
1. Remove the two screws from one side of the unit.
2. Match up the lower pair of holes on a bracket with the vacant screw holes
on the side of the unit.
3. Using the original screws, fasten the mounting brackets to the side of the
unit.
4. Repeat this procedure on the other side of the unit.
5. Fasten the assembly to the rack unit.
Figure 17 SDBR1/2 Mounting Kit