User guide

2 CATx KVM Extender Local Hubs
Safety Precautions and Installation Guidelines
To ensure reliable and safe long-term operation please note the following
installation guidelines:
• Do not use to link between buildings.
• Only use in dry, indoor environments.
• If the building has 3-phase AC power, try to ensure that equipment
connected to the Local and Remote Units is on the same phase.
• Try not to route the CATx link cable alongside power cables.
• The use of shielded CATx cable is recommended to maintain compliance.
• Ensure that the system connected to the Local Unit is connected to power
ground.
• This product is not suitable for use in isolated medical environments.
• To safeguard against personal injury and avoid possible
damage to equipment or property, please observe the
following:
• Only use power supplies originally supplied with the product
or manufacturer-approved replacements. Do not attempt to
dismantle or repair any power supply. Do not use a power
supply if it appears to be defective or has a damaged case.
• Connect all power supplies to grounded outlets. In each
case, ensure that the ground connection is maintained from
the outlet socket through to the power supply’s AC power
input.
• Do not attempt to modify or repair this product, or make a
connection from the CATx link interface (RJ45) to any other
products, especially telecommunications or network
equipment.