User's Manual

21
4. Press the ENTER button on remote or tap “Auto program or Manual program” on screen to
enter the page.
5. Press the / on remote buttons or tap relevant option to select the setting.
6. Press ENTER on the remote again to confirm, tap BACK to return to the setup page.
7. Press the △/ ▽Icon to adjust TFT angle.
8. Press the icon to be back to main menu.
Note: This function is available when TV tuner is connected.
TV MENU
Auto program (Auto seek mode)
z System
Select this menu item is to set TV system: NTSC=>PAL=>SECAM, press ENTER button on
remote or tap the screen to select.
z Audio
Select this menu item is to set the TV sound system:
When system setting PAL, TV sound system can set B/G=>I=>D/K=>/M/N, press ENTER on
remote or tap the screen button to select.
When system setting SECAM, TV sound system can set B/G=>I=>D/K, press ENTER on
remote or tap the screen button to select.
When system setting NTSC, press button to automatic skip search term.
z Search
Select this menu item is to start searching and storing stations automatically.
Manual program (manual seek mode)
z Storage
Select this menu item is to set the storage number.
z System
Select this menu item is to set TV system: SECAM => NTSC =>PAL ，press NTER button on
the remote or tap the screen to select.
z Audio
Select this menu item is to set the TV sound system:
when system setting PAL, press ENTER on remote or tap the screen button to select TV sound
system: D/K=>M/N=> B/G=> I.
When system setting SECAM, TV sound system B/G=>I=>D/K.
When system setting NTSC, press button to automatic skip TV channel term.
Channel
Select this menu item is to set your desired searching channel, press / button on remote to
select one, or press / icon to select channel.
z Fine
Select this menu item is to fine TV tuning and sound until it achieves the best quality, press
/ button on remote to adjust.
z Memory
Select memory on or off is to set whether memory the searched station or not, press ENTER on
remote or tap the screen button to select.