Installation&assembly

1. Prepare Location

Install vanity or slab according to

the manufacturer's guidelines.

Place the sink on the countertop

and determine it's permanent

location. Mark the drain hole and

cut an opening.

Tools You May Need

Follow these mounting instructions for proper vessel installation.

Level

Tape

Measure

Drill

Silicone

Installation Instructions

Vessel Sink

PAGE 1
Installation Instructions Vessel Sink Follow these mounting instructions for proper vessel installation. Tools You May Need Silicone Drill Level Tape Measure 1. Prepare Location Install vanity or slab according to the manufacturer's guidelines. Place the sink on the countertop and determine it's permanent location. Mark the drain hole and cut an opening.
PAGE 2
. Add Silicone To Bottom Of Sink Place a bead of silicone on the underside of the sink. 3. Align Sink Line up the drain hole with the countertop. Be mindful of the overflow hole position, if your sink has one and press firmly. Faucet Click-Clack Drain 4. Sink Accessories Complete your installation by adding the preferred plumbing accessories, such as the faucet, click clack drain, p-trap and angle valves to your sink.