User`s manual

Scantech-ID
UPC-E ON (*)
UPC-E OFF
Note: This step does not include codes for all support Barcode
symbologies.
For a complete overview of support symbologies see appendix.
If you need programming codes for symbologies which are not available
in this chapter, please contact Scantech-ID Technical Support
department or use
VEGA utility tool.
7.5.2 Disable All Symbologies.
Disable All Symbologies
- Disabled all Symbologies.
- Use the“OFF”option to disable individual symbologies.
- Does not reset individual parameters settings for each symbology.
(When you enable a symbology, you recover the parameter settings
stored in memory for that symbology when it was disabled – use reset
factory defaults to reset all the symbology parameters to their factory
default settings).