User`s manual

20 Configuring the VEGA
1. Connect the supplied communication cable at the bottom side
of the cradle.
2. Connect the other side of the communication cable to the right
connector of your POS or HOST system.
3. Plug the external power supply into the power jack on the
bottom of the cradle.
4. Plug the power supply into the AC outlet.
5. Turn on your POS or HOST system.
6. Set up communication between the VEGA scanner and cradle.
To set up communication between VEGA scanner and cradle, see
chapter 4.3 set up Bluetooth Communication.
4.3 V-1020BT SET UP BLUETOOTH COMMUNICATION
Before the VEGA scanner can be used for normal operation, Bluetooth
communication must be set up between the VEGA scanner and cradle,
Scanner client mode or to a Bluetooth application device, Scanner
Server mode.