User`s manual

Scantech-ID
2.1 USE OF THE VEGA
The VEGA is very ergonomic and modern designed and very user
friendly. It can be connected to your POS or Host system trough a
RS232 cable, KBW cable, USB cable or with Bluetooth wireless.
To read a bar code, you simply press the red trigger button and aim the
beam to the bar code. But you need to position the beam so that it falls
across all bars in the 1D barcodes. You will hear one beep and the
green LED indicator will lights on after scan successfully.
The programming of the VEGA is very easy, you can set-up the VEGA
by scan all necessary programming codes one time that meet
applications, the settings are directly saved permanently, and all
settings can be disabled after scan reset factory default.
Thanks to the power full decoding processor, the VEGA can decode all
major 1D codes.