User`s manual

116
8.1 SCANNING TRIGGERING
<Level>
A reading session begins (lighting and decode processing on) when
beam is activated and stops when beam is deactivated.
Continuous Scanning
When the scanner is turned on a continuous reading session begins
(lighting and decode processing on).
Note: The continue scanning mode doesn’t support the V-1020BT.
Pulse
A reading session begins when beam is activated and stays on until a
period of inactivity lasting the time specified by the timeout.
After the timeout, the scan engine turns off.
Note: The pulse mode doesn’t support the V-1020BT.
Continuous + Flashing
When the scan engine is turned on, a reading session begins (no need
to activate the beam).