User`s manual

114
7.38.2 Postamble
The scanner can be programmed to output Barcode data According to
the following format: [BAR CODE DATA] [POSTAMBLE STRING]
Example:
To send a <ETX> after of the Barcode, scan only programming code
<ETX>.
As a result, the scanner will give the following barcode data output:
[BAR CODE DATA] [<ETX>]
Postamble None
CR+LF (*)
CR
LF
<ETX>
It could be possible that you need other Postambles, in that case use
VEGA utility Tool or contact Scantech-ID Technical Support Department.