Instruction Manual

The Sirius S-7030
The specific parts of the Sirius S-7030 are:
5
Sleep mode /
Single Line button
LED
Good read buzzer
Flexible scanner
stand
End cover
Interface cable
User’s manual
Configuration guide
- To “wake-up” the scanner after being in “Sleep
Mode”. The time-out (default 30 minutes) is
programmable using the labels from the
Configuration Guide. During Sleep Mode, the
LED is intermittently flashing red.
- To enable the “Single Line” scan option, when
you need to scan only one out of many
barcodes. See Chapter 3.3.
- A red LED indicates that the scanner is ready to
read a bar code.
A green LED indicates a good read.
- The buzzer is heard whenever a bar code has
been read correctly.
The frequency and volume can be adjusted.
- The rotary and flexible stand allows you to
direct the scan pattern in a way that is optimal
for your application (a mounting kit with screws
and tapes is included). The scanner can be
lifted out for manual scanning.
- This part serves to cover the connector area
of the scanner.
- One of various types of cable to connect to
your host computer / POS system.
See Chapter 2.5 for more details.
- This manual in print.
- Booklet containing barcodes to configure
the scanner
Optional parts & accessories:
Power supply
- Required if your scanner is not directly powered
by the host system (optional).