Operation Manual

SCANSONIC
H I F I L O U D S P E A K E R S
S6
Running-in period
We recommend a running-in time of your new Scansonic
S6 loudspeakers of approximately 15-20 hours at normal
listening level before you decide on the final positioning of the
loudspeakers. During the running-in time the drive units will
settle in and perform as intended.
Care and cleaning
We don’t recommend use of any solvents or cleaners on
Scansonic S6 lacquered cabinets, the cabinet surface usually
only requires dusting or cleaning with a damp soft cloth (only
use cold clean water).
The grille fabric may be cleaned with a normal clothes brush or
vacuumed carefully with the grille detached from the cabinet.
Avoid touching the drive units, especially the tweeter, as
damage may result.
Environmental information
Scansonic S6 loudspeakers comply with international directives
on the Restriction of Hazardous Substances (RoHS) in
electrical and electronic equipment and the disposal of Waste
Electrical and Electronic Equipment (WEEE) - the crossed bin
symbol indicates compliance and that the products must be
appropriately recycled or processed in accordance with these
directives.
sub
sub
sub
fig. 1 stereo fig. 2 surround 5.1 fig. 3 surround 6.1 fig. 4 surround 7.1
fig. 5 amplifier & terminal
ampl if ie r
ce nt er