Operation Manual

7
Connecting your speakers
STEP 1
ConnecttheRED(+)andBLACK(-)terminalsfromtheleftspeakertothecorresponding
terminals on the right speaker using the included speaker cable.
Insulation on cable must be stripped on all ends.
Note: Because this system is self-powered, do not connect the speaker terminals to the
speakeroutputsofastereoreceiveroramplier.
STEP 2
Connect the power cord into the left speaker and the other end into the wall outlet.
Bluetooth function
Pairing Bluetooth device and Scansonic S3 Active speakers:
If you have a Bluetooth function audio device, such as phone, music player, computer and
connect it with Scansonic S3 Active speakers, you should pair them as below:
1. Power on Scansonic S3 Active speakers and select Bluetooth settings/function on the
audio device. Wait a few seconds, to let devices go into Bluetooth mode.
2. Select Bluetooth input option by remote control, indicator light will turn to blue and
ash.Ifthereisanyproblem,pleaseturnoffotherBluetoothdevice.