Operation Manual

Network



Scansonic R4 is compatible with all common network protocols and encryption methods, including

Wi-Fi Protected Setup (WPS).

To connect Scansonic R4 to your network, you need either a wired router and an Ethernet (RJ45

network) cable, or a Wi-Fi wireless router, together with password key if set.

Select:

• WLAN region / country

• Wi-Fi network (SSID)

Standard encrypted network

To enter the network’s key (password), use the Selection knob to move the cursor through the charac-

ters and select. As each character is selected, the key is built up near

the top of the display.

There are three options accessible by turning Select back before the

first characters (0123…)

Backspace, OK and Cancel.

Completion

Scansonic R4 tries to connect to the selected network.

If connecting fails, Scansonic R4 returns to a previous screen to try

again.

If the network connection is lost, Scansonic R4 automatically tries to

reconnect.