Operation Manual

16
4
From Music, there are numerous ways of selecting tracks, including:
• Genre
• Artist
• Album
• Composer
• Rating
Once you have found a track you want to play, press Select . A short press plays the track immediately
and a long press adds the track to the playlist. You can also add entire albums to the playlist.
Scansonic R4 plays either the selected track or the playlist.
FM radio mode
FM radio mode receives analogue radio from the FM band and
displays RDS (Radio Data System) information about the station and
show (where broadcast).
To enter FM mode, either press Mode until the display shows FM
Radio or select Menu > Main menu > FM.
SELECTING STATIONS
To find a station, press Selection knob . The frequency display starts to run up as Scansonic R4 scans
the FM band. Alternatively, you can scan up or down by pressing and holding the >> or << buttons or
tune manually with quick presses, or by turning the Select control.
PRESETS
To store an FM preset, press and hold Preset until the display shows the Save preset screen. Select
one of the 4? presets to save the currently playing station.
To select a preset, press Preset briefly, then select one of the listed preset stations. When a preset
station is playing, it shows Pn (P1, P2 etc) in the bottom right of the screen.
