Operation Manual
8
PA4600
Note:
1. The duration of the charging process depends on the state of charge of the
battery.
2. Remember to take out the battery during longer periods of non-use.
GENERAL OPERATION
- Rotate the Power ON/OFF Switch to “ON” position to turn on the unit, the
display on the unit will light up and display the time digits “00:00” and the
current operating mode.
- Rotate the Function Selector to select different operating mode: DAB, FM,
AUX-IN, Bluetooth.
- Press and hold ►||/OK/STANDBY button for 3 seconds to enter into standby
mode, it will display “00:00:00” and “Time is not set” to prompt you to set the
clock time.
- In Standby mode, press and hold ►||/OK/STANDBY button for 3 seconds to
switch the unit on.
- To completely switch off the unit, rotate the Power ON/OFF switch to OFF
position.
Notes:
1. The time and date can be updated automatically. With auto-update, the time
and date are automatically synchronized with national time signals broadcast
over DAB and FM (when available). It also can be set manually by pressing
the MENU button during any operating mode, and then enter the submenu of
“Set Time/Date” from “System > Time”, press “>” or “<” button to select &
press ►||/OK button to conrm the setting.
2. ECO design: The unit turns to Standby mode automatically if it is not providing
the main functions or inappropriate for the intended use for 60 minutes during
any operating mode (except for FM mode).
OPERATING THE UNIT IN DAB MODE
DAB radio mode receives DAB/DAB+ digital radio and displays information about
the station.
Auto Scan
1. Fully extend the telescopic antenna.
2. Switch the unit on by rotating the Power ON/OFF switch
to ON position to turn on the unit.
3. Rotate the Function Selector to DAB position to enter
DAB mode.