Operation Manual

16
PA4600
- Select a value for each parameter in turn by using “>” or
“<” button and then press ►||/OK button to conrm and
move on to the next parameter.
- It shows “Time Saved” on the display once the date is set.
SETTING AND USING THE ALARMS
As well as a clock/calendar, there are two versatile wake-up alarms with snooze
facility. Each alarm can use a buzzer or a selection from any of the audio sources
for the alarm sound, an active alarm is indicated by a bell icon “ ” in the left of
the LCD display.
Note:
The alarm parameters can only be set during any operating mode after time set.
Set the Alarm 1
1. During any operating mode, press and hold the ALARM/
SNOOZE button, “Alarm1 Setup” is shown on the display.
2. Short press ►||/OK button to set the Alarm1 parameters. The
hour digits ashes on the display.
3. Short press “>” or “<” button to adjust the hour, then press OK button
conrm the hour, the hour digit will stop ashing and the minute digit will start
ashing.
4. The Alarm1 Time Set prompts you for the following parameters. Select a
value for each parameter in turn by using “>” or “<” button and then press
►||/OK button to conrm and move on to the next parameter.
Alarm Parameters:
• On time – hours and minutes
• Duration – 15 | 30 | 45 | 60 | 90 minutes, if the alarm is not cancelled the unit
will return to standby after this time period.
• Alarm Type (Source) – Buzzer | DAB | FM. If DAB or FM is chosen as the
audio source you will also be prompted to select the last listened station or
one of the preset stations (if set).
• Alarm Mode – Daily | Once | Weekends | Weekdays, choose the days on
which the alarm is active.
• Alarm – Off | On