Operation Manual

PA4600

If pairing has been carried out successfully, “Connected” will be shown on the

display, meanwhile, a voice prompt “Connecting” will be heard. After connected

completely, you can listen to music wirelessly through Bluetooth and select music

in Bluetooth device.

4. Short press ►||/OK button to pause or resume playback.

5. Press “>” button to skip to next track, or press “<” button to the beginning of

current track or previous track.

6. To stop the unit, press and hold the ►||/OK button to turn into standby mode

or switch the unit on by rotating the Power ON/OFF switch on the left of the

unit to OFF position.

NOTES:

• The Bluetooth compatibility cannot be ensured for devices (e.g. mobile

phones) getting released in the future.

• To be able to transfer audio data, Bluetooth needs to stay activated in your

player, observe the operation manual of your player.

• If a mobile phone on which you are playing music receives a call, the music

will be interrupted. The sound however is not played back via the speaker.

After you have ended the call, the devices are connected to each other again

and playback continues.

• If there is an existing connection, press and hold the PRESET/PAIR button for

3 seconds to break the current connection and initiate pairing mode.

• The player will be disconnected when your device is moved beyond the

operational range. If you want to reconnect your device to this player, place it

within the operational range.

• If the device is moved beyond the operational range, when it is brought back,

please check if the device is still connected to the player.

• If the connection is lost, follow the instructions above to pair your device to the

player again.

Using the Unit as a Hands-free Bluetooth Speakerphone

1. Link your cell phone to the radio via Bluetooth as described above.

2. When receiving an incoming call on your cell phone, short tap the ►||/OK

button on the unit to switch the incoming call from cell phone to the speaker.

Complete your call using the built-in microphone and speaker.

3. Adjust the volume control of your cell phone to obtain the desired sound level.

4. To end the call, just tap the ►||/OK button again, the call will end. If you were

playing music from your cell phone to the speaker before answering the call,

the music will automatically resume playing when you hang up.