Operation Manual

12
PA4600
display RDS (Radio Data System) information about the station.
1. Fully extend the telescopic antenna.
2. Rotate the FUNCTION Selector to FM position to enter FM mode.
3. Press and hold the “<”/“>” button to search the station, it
will then stop automatically at the rst station it nds.
4. Short press “<” or “>” button to tune the radio down or up
in 50KHz steps for ne tuning.
Note:
If the reception is too weak and there is noise on the received station, try to
improve the reception by changing the position of the telescopic antenna.
Station presets
The unit allows you to store up to 20 FM stations which work in the same way as
described in DAB mode.
Now playing information
While FM radio is playing, the screen shows its frequency, or
if RDS information is available, station name and any further
‘RadioText’ information.
If no information is available, just the frequency and a No Radio
Text message is shown.
To view further information about the broadcast
Each time you press INFO button, the next set of information is
displayed, cycling through: RDS RadioText, programme type,
frequency, time and date.
OPERATING THE UNIT IN AUX-IN MODE
Aux In mode plays audio from an external source such as an MP3 player.
1. Plug one end of the 3.5mm audio cable (included) into the headphone or line
out jack on your player, plug the other end of cable into the unit AUX-IN jack
on the back of the unit.
2. Rotate the FUNCTION Selector to AUX position to enter AUX mode.
3. Turn on the external audio source and play your device.
4. The volume level can now be controlled through the main unit. Operate all
other functions on the external device as usual.