Operation Manual

PA4600

Now playing information

While a station is playing, the screen shows its name and DLS

(Dynamic Label Segment) information broadcast by the station

such as programme name, track title and contact details. Long

DLS info, over 16 characters scrolls across the display.

To view further information

Each time you press INFO button, the next set of information is

displayed, cycling through: DLS text, DL Plus information (this

is only displayed if broadcast by the station), signal strength,

programme type, ensemble name, channel number/frequency,

signal error rate, bit rate, codec/DAB variant, time and date.

Note:

DL Plus presents additional information that can be broadcast by stations and

stored temporarily on your radio.

Dynamic range compression (DRC)

This function reduces the difference between the loudest and quietest audio being

broadcast. Effectively, this makes quiet sounds comparatively louder, and loud

sounds comparatively quieter.

Note:

DRC only works if it is enabled by the broadcaster for a specic station.

To change the DRC setting

Select Menu > DRC, then press ►||/OK button to enter the

DRC submenu.

Press “>” or “<” to select the available

options: DRC off, high, low.

DRC off: DRC is switched off.

DRC high: DRC is switched on; the default setting recommended for noisy

environment.

DRC low: DRC is set to half normal level.

OPERATING THE UNIT IN FM MODE

FM radio mode receives analogue radio from the FM band (87.5-108MHz) and