Operation Manual

26
1. Press MENU button > Main menu > System settings > Software update, press
SELECT/SNOOZE knob to conrm.
2. Turn SELECT/SNOOZE knob to select 'Auto-check setting', your radio will check periodically
for new version software.
3. Turn SELECT/SNOOZE knob to select 'Check now', your radio will check now if any new
version software available for upgrade.
Setup Wizard
When this unit is started for the rst time, it runs through a setup wizard to congure settings for
date/time and network. Once this has nished, the system is ready to use in most modes.
1. Press MENU button > Main menu > System settings > Setup wizard, press
SELECT/SNOOZE knob to conrm.
2. Turn SELECT/SNOOZE knob to select 'YES', and then press SELECT/SNOOZE knob to
conrm.
Viewing System Info
This information may be requested when dealing with technical support issues.
1. Press MENU button > Main menu > System settings > Info, press SELECT/SNOOZE knob
to conrm.
2. Turn SELECT/SNOOZE knob to view 'SW version', 'Spotify version', 'Radio ID' and
'Friendly Name'.
Setting Backlight
1. Press MENU button > Main menu > System settings > Backlight, press SELECT/SNOOZE
knob to conrm.
2. Turn SELECT/SNOOZE knob to select 'Power-on Level' or 'Standby Level', then press
SELECT/SNOOZE knob to conrm.
3. Turn SELECT/SNOOZE knob to select backlight level, and then press SELECT/SNOOZE
knob to conrm the setting.
Power-on Level
•
High
•
Low
Standby Level
•
High
•
Low
•
Off