Operation Manual

6
2. Press SELECT to confirm ‘Update from Network’. Now, follow your radio’s instruction, configure the
following parameters:
 Timezone: select your local timezone.
 Daylight saving: On or Off as per your country status.
 Wlan region: Most of Europe/USA/Canada/Spain etc.
 SSID: In some cases, radio may find more than one network. Turn SELECT to your favorite one, press
SELECT to confirm.
 Note: If a password (WEP/WPA) isn’t required by your network, radio will connect to the network
automatically.
3. If a WEP/WPA key (password) is required, radio will ask you to input the WEP/WPA code and display
the password entry screen as follows:
 Turn SELECT to cycle through the alphanumeric character list, press SELECT to select an
appointed character.
 Note: WEP/WPA pass codes are case-sensitive.
 If a wrong operation is being conducted, select ‘ ’ to delete designated
character.
 Note: a.> = Backspace.
b.> the method of select , or : while cursor point to ‘ ’, anti-clockwise turn
SELECT , and you can select , then continue anti-clockwise turn SELECT to select
or in turn.
c.> means return to previous track.
d.> Radio will automatically save the WEP/WPA you’ve input, so no bother to re-enter these codes.
After selecting the final character of your password, turn SELECT to , and then press
SELECT to confirm, and then follow your radio’s demonstration, press SELECT again to exit.