Operation Manual

22
Enter Setup Wizard
When this unit is started for the first time, it runs through a setup wizard to configure settings
for date/time and network.
Once this is finished, the system is ready to use in most modes.
1. To run the setup wizard again, the path is: < System settings >  Setup wizard  Yes.
2. Press SELECT to confirm ‘Yes’, then step by step to set it.
SW Version and Radio ID
 Note: This information may be requested when dealing with technical support issues.
1. It can be activated by pressing MENU  < System settings >  < Info >.
2. Press SELECT to confirm.
Brightness
 Note: Here, High brightness level can get you pretty easy to view the station information. Set to Low can let you
feel comfortable while you do not want the light bothering you.
For Power-on condition:
The path is: press MENU  < System settings >  < Brightness >  Power-On level 
Low/Medium/High (Set to high level is recommended).
For Standby condition:
The path is: press MENU  < System settings >  < Brightness > Standby level 
Low/Medium/High (Set to low level is recommended).